1940 PWT
Urethane Coated Fabric to Meet ATPD 2265 Specifications
|
|
|
|---|---|
| Base Fabric Type |
Nylon
|
| Base Fabric Weight (nominal) |
40.0 oz/yd2
|
| Thickness ASTM D751 |
40 mil |
| Coating ASTM D-751 |
Polyether Polyurethane |
| Tongue Tear ASTM D751 |
35/35 lbs |
| Strip Tensile ASTM D751, Cut Strip Method |
500/500 lbs/in |
| Adhesion ASTM D751, Dielectric |
30 lbf/in min |
| Low Temperature ASTM D2136 1" mandrel, 4 hrs |
Pass @ -50° F |
| Puncture Resistance ASTM D-751 |
200 lbs. |
| Dead Load Seam Strenth 200° F /93° C |
2" overlap seam 100 lbs./in. |
We believe this information is the best currently available on the subject. We offer it as a suggestion in any appropriate experimentation you may care to undertake. It is subject to revision as additional knowledge and experience are gained. We make no guarantee of results and assume no obligation or liability whatsoever in connection with this information. In case of conflict between standard and metric specifications, standard shall apply.
